4-Axis πShaper Mount M27
lockable 4-Axis πShaper mount for industrial applicationsLike all beam shapers πShaper should be properly aligned using 4-axis mount.
The typical tolerances are: 0.1 mm lateral shift and 10 arcmin tilt.
These conditions are easily fulfilled by the Mount M27.
πShaper Mount M27 for industrial applications:
- 4-axis Mount alignment
- HEX alignment screws
- locking the alignment screws
- flexibility in installing the πShaper
- 6 mounting faces for optimum orientation
Specifications
| Tilt/tip range | ±4° |
| Sensitivity | 3 arcsec |
| X/Y translation range | ±2 mm |
| Sensitivity for X/Y translation | 1 µm |
| Locking of alignment screws | Yes |
| πShaper Mounting | Inner Thread M 27x1 |
| Overall dimensions | 66 x 66 x 34 mm |
| Mounting | Thread M6, 6 positions |
| Weight | 320 g |
Drawing
4-Axis πShaper Mount
The principle of intensity re-distribution requires the πShaper
to be properly aligned using 4-axis mounts. Typical tolerances are 0.1 mm lateral shift and
10 arcmin tilt, - these conditions can be easily fulfilled by widely used optical Mounts.
πShaper Mount:
- 4-axis Mount alignment
- Alignment screws with knobs, convenient for manual alignment
- 2 mounting faces for optimum orientation
Specifications
| Tilt/tip range | ±2° |
| Sensitivity | 3 arcsec |
| X/Y translation range | ±2 mm |
| Sensitivity for X/Y translation | 1 µm |
| πShaper Mounting | Inner Thread M 27x1 |
| Overall dimensions | 77 x 77 x 65 mm |
| Mounting | Thread M6, 2 positions |
| Weight | 200 g |
Drawing
4-Axis πShaper Mount industrial
The principle of intensity re-distribution requires the πShaper
to be properly aligned using 4-axis mounts. Typical tolerances are 0.1 mm lateral shift
and 10 arcmin tilt, - these conditions can be easily fulfilled by widely used optical Mounts.
πShaper Mount for industrial applications:
- 4-axis Mount alignment
- HEX alignment screws
- locking alignment screws after finishing the alignment
- 5 mounting faces for optimum orientation
Specifications
| Tilt/tip range | ±4° |
| Sensitivity | 3 arcsec |
| X/Y translation range | ±2 mm |
| Sensitivity for X/Y translation | 1 µm |
| Locking of alignment screws | Yes |
| πShaper Mounting | Inner Thread M 27x1 |
| Overall dimensions | 79 x 79 x 34 mm |
| Mounting | Thread M6, 5 positions |
| Weight | 200 g |
Drawing
Aligner
No more problems with Alignment!
Aligner presents a tube with mounting thread M27x1 in its central part, this thread is identical to one
used at most of πShaper /
Focal-πShaper systems.
The tube ends are precisely machined with respect to the thread and are used for mounting with tough tolerance replaceable apertures:
The tube ends are precisely machined with respect to the thread and are used for mounting with tough tolerance replaceable apertures:
- at entrance - aperture of 2 mm diameter
- at exit - apertures of diameters
- 3 mm
- 2 mm
- 1 mm
Aligner in the πShaper Mount
